SciELO - Scientific Electronic Library Online

 
vol.26 issue2Correlation between velocity and backscatter distributions and zooplankton concentration in a modified estuaryCharacterization of TLPB joints of metallic products by means of synchrotron radiation author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

  • Have no cited articlesCited by SciELO

Related links

  • Have no similar articlesSimilars in SciELO

Share


Anales (Asociación Física Argentina)

Print version ISSN 0327-358XOn-line version ISSN 1850-1168

Abstract

MUNOZ VASQUEZ, N; MARINO, B.M  and  THOMAS, L.P. Characterization of the thermal behaviour of a prototype building in Tandil (Buenos Aires). An. AFA [online]. 2015, vol.26, n.2, pp.78-87. ISSN 0327-358X.

The choice of the location and orientation of a construction and the decisions made during the early stages of the design affect significantly the energy consumption necessary for its functioning. Particularly, this is the case in which the optimal use of natural ventilation is convenient to reduce energy costs and pollution of the air indoors. Careful control of the solar resource can also considerably diminish the costs derived from the use of air conditioners. The thermal behaviour of a building that is representative of the constructive procedure in Tandil city is evaluated during the summer with the purpose of optimizing future constructions that minimize the energy comsuption. The analysis of continuous and systematic temperature and humidity measurements performed with sensors in specific points inside the building and the external meteorological parameters is presented. The information collected is integrated by means of an analytical model that considers the contributions of the conductivity, radiation and convection caused by the wind. The goal is to estimate the typical thermal parameters of the building and, with them, the heat flux across the envelope, solving the "inverse problem". The results are compared with those obtained solving the standard "direct problem".

Keywords : Thermal evaluation; Analytical model; Heat transfer; Actual use conditions.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License