SciELO - Scientific Electronic Library Online

 
vol.32 issue3Effect of the radiochemical impurities of 99mTC-MIBI on the diagnostic quality of the images in nuclear medicineEnergies and vibrational modes of species formed by dehydrogenation of CH4 in presence of O2 over Cr2O3(0001) author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

  • Have no cited articlesCited by SciELO

Related links

  • Have no similar articlesSimilars in SciELO

Share


Anales (Asociación Física Argentina)

Print version ISSN 0327-358XOn-line version ISSN 1850-1168

Abstract

PERILLO, P. M.  and  RODRIGUEZ, D. F.. Humidity sensor using CuO nanorices thin film. An. AFA [online]. 2021, vol.32, n.3, pp.76-82. ISSN 0327-358X.  http://dx.doi.org/10.31527/analesafa.2021.32.3.76.

In this paper a humidity sensor based on CuO has been successfully fabricated. Thin film of CuO nanorices were synthesized by Successive Ionic Layer Adsorption and Reaction (SILAR) method on silicon wafer with Si3N4 thin layer as a substrate. The microstructure and morphology of the samples were investigated using X-ray diffraction (XRD) and scanning electron microscopy (SEM). Humidity sensing properties of the thin films have been studied. The sensing response has been measured in the relative humidity (RH) range from 20 up to 80% at room temperature. It was found that impedance of the system decreases as the RH was increased. The prepared sensor revealed good reversibility with response and recovery time of 130 s and 320 s respectively. The complex impedance spectra were analyzed in the range of 0.1 to 1 kHz. This type of humidity sensor can be used as a new generation of ecological sensors with low cost and good stability. It makes the sensor a candidate for practical applications.

Keywords : CuO; nanorices; SILAR; humidity sensor; impedance spectroscopy.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )